HYDRAULIC MONITOR GM-88 “MOSKIT”
Technology of hydraulic jetting aimed at effective well bore cleaning and matrix stimulation of bottom hole formation zone.
Hydraulic Monitor GM-88 “Moskit”
Projects
Check out our projects
Оценка зон для уплотняющего бурения
Испытания Гидромониторной Технологии Интенсификации Добычи
LET'S START A PROJECT
Give us a call or drop by anytime, we endeavour to answer all enquiries within 24 hours on business days. We will be happy to answer your questions.
Advantages
The technology allows:
- Producing pulsations and low-frequency high-amplitude oscillations with any intensifying reagents, including acidic complexes
- Producing a jet of active fluid, including an acidic complex jet
- Stimulating the well near oil-water and gas-liquid contacts as well as in the water cut areas
- Applying “standard equipment” for oil recovery enhancement
Solution comparison
Hydraulic monitor jet enhances the effectiveness of working fluids and doubles the depth of formation treatment in comparison with chemical reagent injection according to the standard technology.
The radial jet produces pulsations and increases the sweep and the depth of stimulation due to the redistribution of pressure over lower and higher inter-layers.
Engineering design
Works performed according to the hydraulic monitor jetting technology with the use of GM-88 “Moskit” are planned and optimized in production casings with nominal diameter exceeding 127 mm. They guarantee better performance and cost-efficiency in comparison with the “standard technology” of matrix formation stimulation.
Equipment characteristics
| Parameter | Value |
|---|---|
Outer cylinder diameter, mm | 88,0 |
Length, no less than, mm | 850,0 |
Coupling thread | (tubing) NKT-73 GOST 633-80 |
Maximum operating pressure, no more than, MPa | 20 |
Flow rate, no more than, l/s | 20 |
Safety
Equipment GM-88 complies with safety requirements of Technical regulations of the Custom Union “On safety of machines and equipment” (TR CU 010/2011).
The declaration is included in the Unified State Register of certificates and declarations of compliance. Registration number: EAEU № RU Д-RU.PA08.B.73508/22.
Grant support
Equipment GM-88 “Moskit” is developed with support of Innovation Promotion Fund.
Сотрудничество с лидером в области сервисного обслуживания нефтегазового сектора
What is Included
Steeler™ is an emerging programme built on five years of work to define and promote steel that has been produced and sourced responsibly. The Australian Steel Stewardship Forum initially developed the concept.
Steeler™ is an emerging programme built on five years of work to define and promote steel that has been produced and sourced responsibly. The Australian Steel Stewardship Forum initially developed the concept.
Steeler™ is an emerging programme built on five years of work to define and promote steel that has been produced and sourced responsibly. The Australian Steel Stewardship Forum initially developed the concept.
Steeler™ is an emerging programme built on five years of work to define and promote steel that has been produced and sourced responsibly. The Australian Steel Stewardship Forum initially developed the concept.
Steeler™ is an emerging programme built on five years of work to define and promote steel that has been produced and sourced responsibly. The Australian Steel Stewardship Forum initially developed the concept.